Here is a tutorial on generating and programming remote key on Lexus EX330 with KD900 remote generator and SKP900 auto key programmer. Device: SKP900 Key Programmer KD900 Remote Maker Original key and new key Vehicle model: LEXUS RX330 or TOYOTA Harrier Part 1: Generate Remote with KD900 Connect remote module with KD900 Select TOYOTA 314 FSK -> MAKE REMOTE Make remote success, press ESC Simulate device success, then put the remote module into key shell Part 2: Program Remote with SKP 900 Select “TOYOTA” -> Remote Choose “Remote system1” on SYSTEM SELECTION menu Insert original key and Turn ignition on SKP900 is communicating with vehicle… Choose “Program Remote” Then turn ignition on and open the drive door In 5 seconds, press LOCK & UNLOCK button of Remote twice Matching success! Now test the remote Test the power door Done! SKP900 car key maker Program remote for Lexus RX330 success! The new programmed key is working now.
0 Comments
How to: reed eeprom/pin, make and add dealer key and program remote control to a Fiat Ducato 2007 Marelli 70F3237+ 95160 (ID48). Read EEPROM 95160/Pin and add a dealer key with OBDSTAR X300 DP PLUS/Key Master DP PLUS Fiat-Ducato-2007-obdstar-x300-dp-1 Fiat-Ducato-2007-obdstar-x300-dp-2 Fiat-Ducato-2007-obdstar-x300-dp-3 Add the remote separately with Id48 the transponder using Keydiy KD-X2 remote maker. Generate fiat chip and the make dealer key (chip) after that id48. but need to make an original 3 button remote, because that an important button. Fiat-Ducato-2007-obdstar-x300-dp-4 Fiat-Ducato-2007-obdstar-x300-dp-5 Fiat-Ducato-2007-obdstar-x300-dp-6
A quick demonstration of Lonsdor K518ISE programming key for 2005 Ford Focus in two minutes. And for more auto key programming,check hereautomotive key programming cases.
This is the Ford with this key the HP 100 101, sorry not the Tibbe key. It’s very simple to use Lonsdor K518ISE. You see there is a range of other things but we’re just doing this key today. So just show you the original key is this one and when you put that in the ignition, turn the ignition on and this light here that’s currently, flashing will go solid and then go out that shows that the system’s working. The new key is this one, it’s been cut ready, switch the ignition on and you see that light goes just flash basically, so it’s not programmed yet. So, go to “Immobilizer“. There is a nice search function at the right corner of the machine. Type F and choose “Ford”, then “China”. Yes, it does say China, but I’ve tested it quite a few times there’s name of Europe, South America, and anything else, it’s just China here, but it does work under that, so we are gonna go for China. We will see that years the classic focus’s, tap “Type 2”, then “Immobilizer”. Tap “Add key”, then get message “Downloading application”. Read message ” Connect device (Lonsdor K518) OBD test cable with the vehicle OBD port, switch ignition one.”, tap “OK”. Please insert the new key to be programmed. Note: It needs two right keys to start vehicle. So we are in a certain new key to be programmed which is this new one here, so press “OK”. Identified number of programmed keys in car:2, select “OK”. Programming, please wait… Programming complete, successfully programmed key count (2). So I’m going to test out because that should have jumped up to free rarely. Just ignition on, insert back to see if the light goes solid and goes out. So that’s goes solid and goes out, the key is programmed. And going to check another one, insert into the ignition and to see if the light goes solid and goes out, then the key is programmed successfully. So they both work. So when it says keys programmed to it must have meant the new key count will be too, so there must have just been just this one key programmed at the time and the other key is gonna be this one the new one. To me that should say free, but it works, the both start the car. So we’re gonna do is pop the key in just test it turn the ignition on, might go solid and goes out, means it’s gonna work it’s a neutral, start the car. So Lonsdor K518 programmer takes literally less than two minutes to program the key.
Handy Baby 2 Hand-held Car Key Copy Key Programmer for 4D/46/48 Chips |
Archives
February 2022
类别 |