OBD2TOOL has newly launched a OBDSTAR Key SIM 5 in 1 key simulator. It can be used withOBDSTAR X300 DP Plus(Key Master DP Plus), X300 DP and X300 Pro4(Key Master 5) to calculate password for Porsche (2005-2010), HYUNDAI/KIA 46 transponder and support Toyota/ Lexus 4D &H smart key simulation, etc. In fact, it’s a good simulator to replace Toyota simulator card 1-4. Something important to know: If you have Toyota simulated key 1/2/3/4 in hand, now you can update X300 DP Plus TOYOTA software to the latest version 32.37 so that they can work well together. With these simulator keys and newest IMMO-TOYOTA V32.37, users are allowed to use X300 DP Plus to program the following type of Toyota smart keys when all keys have lost. Emulator key 1 for Toyota smart key 94/D4 type Emulator key 2 for Toyota smart key 98 type Emulator key 3 for Toyota smart key 88/A8 type Emulator key 4 for Toyota smart key A9 type
What is the specific function of OBDSTAR Key SIM 5 in 1? It can generate keys with our devices such as OBDSTAR X300 Pro4 and X300 DP Plus in the case of all keys lost, so the ignition switch can be turned on, and then a new smart key can be added and programmed. Check the details as below: Supports 46, 4D Data Collection Main steps: Step 1: Read EEPROM Step 2: Make simulated card Step 3: Add smart key Connect X300 DP Plus with the Toyota/Lexus car and turn on device Select IMMO-> Asia-> TOYOTA LEXUS-> TOYOTA/LEXUS V32.36-> Manual Select System-> PROXIMITY-> TYPE 5 (ALL SMART KEYS LOST) Step 1: Read EEPROM Read the on-screen instruction -> read out EEPROM data and save Step 2: Make simulated card Tap “Make Simulated Card” and make sure the internet connection is normal. Read the related function instruction carefully and ensure the simulated card is fully charged. Select the original EEPROM data file just saved in step 1 and press “Enter” to continue Connect Key SIM simulated card to X300 DP Plus via USB cable It will generate the corresponding type simulated card in 1 or 2 minutes. Generate the simulated card successfully Finally put the OBDSTRA Key SIM close to the start button of the car and try to light the meter. Step 3: Add smart key Once you can light up the meter normally, and then use the simulated card instead of the original car key to do [Add Smart Key] function.
0 Comments
Leave a Reply. |
Archives
February 2022
类别 |